Kowa TSN-PA7 DSLR Digiscoping Adapter TSN-880 and TSN-770 Spotting Scopes

Kowa SKU: KWTSN-PA7
Price
Regular price $30399
Regular price Sale price $30399
Save $-303.99
/
  • $13.99 Standard Shipping
  • All prices in AUD
  • Authorised Australian Retailer
  • Secure payments
OZ Warranty - Lifetime
Shipping calculated at next step (Standard $13.99 shipping unless rural or multiple items)

The Kowa TSN-PA7 DSLR Digiscoping Adapter attaches your DSLR camera body directly to the body of your Kowa TSN-880 or a TSN-770 Spotting Scope via a T2 mount, transforming your scope into an extremely high powered telephoto lens for you DSLR, or Mirrorless/MFT camera.

In contrast to conventional digiscoping, where the image produced by the spotting scope eyepiece is photographed, the TSN-PA7 connects your camera body directly to the body of the scope via a T2 mount, without the need for an additional, special digiscoping eyepiece. This great set up allows you to harness the full zoom range of your scope's eyepiece, creating a high powered, yet lightweight and compact telephoto lens, when compared to traditional telephoto lenses.

Designed for use with the standard Kowa zoom eyepieces commonly used with 88mm and 77mm Kowa spotting scopes, this adapter gives you up to 2570mm of focal length when used with the TE-11WZ Eyepiece and up to 2750mm of focal length with the TE-10Z Eyepiece.

Focus is achieved by using the responsive dual manual focus wheels on your scope body. Incorporating quick and ultra fine focus options, you are in full control of focusing, and the decision is yours to quickly and accurately manual focus on even the most challenging of subjects.

The excellent design of this adapter allows you to quickly attach and release your camera from your spotting scope so you can easily switch between viewing and photography modes.

If you’re looking for an digiscoping adapter that will allow you to not only experience stunningly sharp views of the world around you, but also take highly magnified, detailed and vibrant photographs and videos with your D-SLR camera, then look no further than the TSN-PA7 DSLR Digiscoping Adapter.


How to mount your TSN-PA7 DSLR Digiscoping Adapter:

  1. Thread the included collar ring directly onto the body of your scope, before attaching the eyepiece
  2. Thread your eyepiece onto the collar
  3. Slide adapter over the eyepiece and lock to the collar with locking screws
  4. Use specific Kowa TSN-CM2 Camera Adapter T- Mount (purchased separately) to attach TSN-PA7 to camera body

 

Kowa TSN-PA7 DSLR Digiscoping Adapter TSN-880 and TSN-770 Spotting Scopes

Features:

  • Compatible with full frame, APS-C, mirrorless, compact system and MFT camera bodies
  • Designed for use with 88mm and 77mm spotting scopes with either the TE-11WZ or TE-10Z Eyepiece
  • Requires additional Kowa TSN-CM2 Camera Adapter T- Mount
  • Simply slides over the eyepiece and secures to a scope body via a collar
  • The focal length is up to 2570mm when used with the TE-11WZ Eyepiece
  • The focal length is up to 2750mm when used with the TE-10Z Eyepiece
  • Maintains the full zoom range of your eyepiece

 

Specifications:

  • Weight - 204g


Unsure what digiscoping equipment you need for your camera and spotting scope? Use this handy chart to figure out your requirements. 

Warranties

At ScopeUout we pride ourselves on selling high quality sporting optics. In the unlikely event that your product has a manufacturing fault, you can be safe in the knowledge that it is covered by a manufacturers warranty.

Your rights as a consumer are also protected under Australian Consumer Law. More information about this is available here.

Please see below for specific manufacturers warranty information for the different brands of products available to buy from ScopeUout.

Please contact us to obtain return authorisation before sending items back to us.

Accura

Our Accura riflescopes are covered by a lifetime warranty against manufacturers defects. Accura telescopes have a two year warranty.


Athlon

Our Athlon products are warranted to be free of defects in materials and workmanship for the lifetime of the product. Athlon will also repair or replace, at no charge to you, your product if you should damage it through normal use. No receipt needed, no registration required. This is a commitment that Athlon will be the best product you can buy for your money.

BKL Technologies

Our BKL Technologies rings and mounts are covered by a one year warranty against manufacturing defects. 

Kite Optics

All Kite Optics stabilising binoculars and scopes with the exception of the Stabi One pocket scope are covered by a 30 year manufacturer’s warranty covering both parts and electronics. The Stabi One is covered by a 2 year warranty on both parts and electronics.

Kowa

Our Kowa binoculars, spotting scopes and accessories carry a limited lifetime warranty against manufacturing defects. 

Minox

Minox optics are covered by a 30 year manufacturers warranty against defects. 

Nikon

Nikon binoculars are covered by a 1 year manufactures warranty. 


Olympus

Olympus binoculars have a one year manufactures warranty against manufacturing defects.

Oz-Mate

Our Oz-mate binoculars carry a limited lifetime warranty against manufacturing defects.

Pentax

All Pentax binoculars are covered by a one year manufacturers warranty against manufacturing defects.

Slik

Our Slik tripods have a one year manufacturers warranty.

Ultradot

Ultradot products are covered by a lifetime manufacturers warranty.

Vanguard 

Vanguard binoculars, spotting scopes and rifle scopes are covered by a lifetime manufacturers warranty. Vanguard accessories are covered by a five year warranty. 

Vixen

Our Vixen riflescopes carry a lifetime manufacturers warranty against manufacturing defects. Our Vixen telescopes have a one year warranty. 

Vortex

Our Vortex products are covered by a fantastic unlimited lifetime warranty. You can find out more on the Vortex website. 

Yukon

 

Our Yukon products are covered by a three year manufacturers warranty against defects.

 

To qualify for cover under the manufacturers warranty please keep your confirmation email and tax invoice from ScopeUout as proof of purchase. In some cases you will need to register your product with the manufacturer to be eligible for the manufacturers warranty. Please read all manufacturers documentation included with your product to ensure that you follow all manufacturers warranty requirements. ScopeUout will not accept any responsibility for customers failure to comply with manufacturers warranty requirements. 

Ask a question

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

You may also like
More from Kowa